DC 24V 80W Mini Strung pentru lucru cu lemnul

299,00 Lei
La comanda

Durata de livrare: termen de livrare 20-40 zile dupa confirmarea platii avansului. Daca ridicati din sediu va rugam sa asteptati confirmarea de procesare a comenzii!

Transport gratuit
Limita stoc
- +
Adauga in cos
Cod Produs: 32870329410 Ai nevoie de ajutor? 0757307548
Adauga la Wishlist Cere informatii
  • Descriere
  • Review-uri (0)

Pachetul include:

1x Mini strung

1x Sursa alimentare

1x Set modelare lemn



Product description


Material:Aluminium alloy.

Input voltage: 24V DC.


Speed of revolution:4000-8000rpm(7 stage speed regulation).

Maximum turning diameter: 70mm.

Maximum clamping length: 180mm.

Chuck clamping range: 0.6-6mm.



Input: AC110V- 240V~50/60Hz 1.5A max

Output:12/15/16/18/19V 4.5A max; 20/24V 4A max

Lungime cablu:1.1m+1.1m



1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.

2.The speed can be adjusted in 4000-8000R, cut wood should not exceed 4000, grinding can use higher speed.

3.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

4.If not a cylinder, the speed should be reduced.

5.Tailstock bearing without lock tight.

6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

7.If you do not really understand the operation, it is best to consult a professional person.








Scrie un review

Suport clienti 9:00-17:00

0757307548 comercial@unda.tech


Trebuie sa mai adaugi cel putin un produs pentru a compara produse.


A fost adaugat in wishlist!

A fost sters din wishlist!